Product
Integrated Eddy Current Probe Sensor
● The probe and sensor are integrated; lighter in size and easier to install.
● Temperature-poor and corrosion-resistant polyphenylene sulfide (PPS) injection molding
● Excellent dust and moisture resistance
● With power polarity, output short circuit, various protection functions, any wiring error will not be damaged
● Strong anti-interference ability, high reliability and long life
Send Inquiry
Product Introduction
YDYT9800 Integrated eddy current proximity sensor is widely used in electric power, petrochemical, metallurgy, machinery and other industries, monitoring the shaft displacement, shaft vibration, shaft speed and other parameter of the large rotating machinery for long-term, the instrument can analyze the working conditions and the cause of the equipment failure thus effectively protect the equipment and have predictive maintenance, the instrument can also measure the displacement, amplitude, speed, size, thickness, surface roughness etc.
YDYT9800 Integrated proximity sensor designed and manufactured according to U.S. military specifications, the head of the probe using resistant to high / low temperature and injection molding protection by various chemical corrosion of polyphenylene sulfide (PPS), the coil is hermetically sealed；circuit using anti-acid stainless steel tube M16 × 1 thread and epoxy package, moisture and dust resistance;signal cable with shielded cable, stainless steel metal hose armor protection is available; with power polarity, output short circuit protection features ， any connection error will not cause damage ; Continuous operation under harsh environments is feasible.
 |  |  |
Production process
| Technical details | |
| General data | |
Design | Distance（displacement） transmitter |
Sensor type | Electromagnetic induction |
vibration range | Displacement: 0~10mm（customization） |
| Operating temperature | -40～ +85°C |
| Temperature drift | ≤0.05%/°C |
| Frequency response | 0 ~ 10kHz;（amplitude frequency characteristics 0~1 kHz attenuation is less than 1%） |
| Power supply | -12V（DC）～ -24V（DC）(minus voltage output form sensor power supply） |
+12V（DC）～ +24V（DC）(current or voltage output form sensor power supply） | |
| Linear error | ≤1%FS |
| Resolution ratio | 0.05% |
| IP grade | IP68 |
| Shell materisl | Stainless steel |
| Further information | |
Features and Advantages | |
1 | Integrated proximity sensor,non-contact measurement, permanent abrasion |
2 | The probe and sensor are integrated; lighter in size and easier to install. |
3 | Temperature-poor and corrosion-resistant polyphenylene sulfide (PPS) injection molding, excellent dust and moisture resistance |
4 | With power polarity, output short circuit, various protection functions, any wiring error will not be damaged |
5 | Strong anti-interference ability, high reliability and long life |
6 | Operate in harsh environments for long periods of time |
Applications | |
YDYT9800 integrated eddy current displacement sensor is used in the industrial fields of electric motor, electric power, petrochemical, metallurgy, etc. Especially widely used in Centrifugal Pumps、Turbo compressors 、Steam Turbines 、Fans and Blowers Generators、Electric Motors 、Gear Boxes 、Journal Bearing Machines, etc. | |
| Parameters | |||
| Diameter of the probe head(mm) | Linear range(mm) | Nonlinear error | The minimum area to be measured(mm) |
Φ5 | 1 (Extended to 2) | ≤±1% | Φ15 |
Φ8 | 2 (Extended to 4) | ≤±1% | Φ25 |
Φ11 | 4 (Extended to 8) | ≤±1% | Φ35 |
Φ18 | 8 (Extended to 12) | ≤±1.5% | Φ45 |
Φ25 | 12(Extended to 22) | ≤±1.5% | Φ50 |
Φ50 | 25 (Extended to 30) | ≤±2% | Φ100 |
| Dimension | ||||
| Diameter of the probe head(mm) | Optional casing thread | The length of minimum casing thread | The length of the probe head | |
Without armored | Armored output | |||
Φ5 | M10×1 | 75mm | 85mm | 5-8mm |
M16×1 | 50mm | 60mm | ||
Φ8 | M10×1 | 75mm | 85mm | 11-13mm |
M12×1 | 50mm | 60mm | ||
M16×1 | 50mm | 60mm | ||
Φ11 | M10×1 | 75mm | 85mm | 11-13mm |
M12×1 | 50mm | 60mm | ||
M16×1 | 50mm | 60mm | ||
Φ25 | M10×1 | 75mm | 85mm | 35mm |
M12×1 | 50mm | 60mm | ||
M16×1 | 50mm | 60mm | ||
Φ50 | M10×1 | 75mm | 85mm | 55mm |
| selection table YDYT9800-A□□-B□□-C□□-D□□-E□□-F□□-G□□-H□□ | |||||
A Range | B Output form | C Thread mounting | D Shell length | E Cable length | F Lead way |
01:0-01mm 02:0-02mm ...... 10:0-10mm | 01:0.5-10.5v 02:1-5v 03:4-20mA 04:-2~-18v 05:0-5v 06:-5~+5v 07:-10~+10v | 01:M10*1 02:M16*1 03:M12*1 04:M14*1.5 05:M30*2 06:1/4-28 07:3/8-24 08:1/2-20 09:5/4-12 10:Special customized | 01:80mm 02:120mm 03:Special customized | 01:1m 02:2m 03:3m ........ 10:10m | 00(k)Directy lead K)means armoured 01:Aviation plug |
Established in 2004, Shanghai Cezhen Automation Instrument Co.,Ltd is Eddy Current Probe Sensor manufacturer and trader specialized in the research, development and production of Eddy Current Probe Sensor. We are located in shanghai, with convenient transportation access. If you are interested in any of our Eddy Current Probe Sensor.or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Hot Tags: integrated eddy current probe sensor, China, manufacturers, suppliers, cost, price
Previous:
YD35 High Temperature Velocity Sensor
Send Inquiry
